SL1625FG · Gasket & Seal
SL1625FG CNC Gasket Cutting Machine for Full 1600 × 2500 mm Sheets
The SL1625FG is a full-sheet CNC gasket cutting machine for rubber, graphite, PTFE, non-asbestos fibre and similar sealing materials. Its 1600 × 2500 mm working area accepts standard full sheets, while the vacuum table and oscillating knife support die-less replacement gaskets and short production runs.
- Full 1.5 × 2 m gasket sheets
- Replacement and one-off gaskets
- Small and medium production batches
Technical specification
SL1625FG at a glance
| Parameter | Specification |
|---|---|
| Working area | 1600 × 2500 mm (customizable) |
| Table | Vacuum flatbed |
| Tool | Oscillating knife |
| Tolerance | ±0.1 mm |
| Max cutting thickness | ≤40 mm |
| Max cutting speed | ≤1500 mm/s |
| Drive | Japan servo motor; Taiwan guide rail and rack |
| Software | Machine control + intelligent nesting |
| Power | 11 kW |
| Gross weight | 1300 kg |
Specifications are a starting point. Table size, tooling, voltage, feeding and safety options are configured around the application.
Before you commit
Verify the machine on your own material
A brochure cannot answer whether the edge is clean, whether the vacuum holds a small part or whether the cycle time meets your shift target.
Send the material
Three A4 pieces and one drawing. We confirm what the material is and how it should be held.
We cut and record
Tool, frequency, feed, vacuum zones and passes are recorded at production speed.
You get a priced setup
Cut parts, parameter sheet, tool recommendation and one machine configuration before deposit.
Related decisions
Read the application page before finalising the specification
The category page explains the material range, tooling choices and alternative models. The buying guide explains the questions that change the quote.
Decision support
Specification questions
Direct answers to the questions that usually arrive before a machine specification is approved.
Can this model be customized?
Yes. Working area, tooling, feeding, voltage, vacuum zoning and safety options can be configured around the material and production plan. The model number is a starting platform, not a fixed box.
What is the lead time?
A standard configuration is typically quoted at about 15 days after deposit. A custom configuration can take about 30 days. The exact schedule is confirmed in the quotation.
What warranty is included?
Shilai currently publishes a 3-year machine warranty. Wear parts and consumables are handled separately. The quotation states the final warranty terms.
Can I see the machine tested before shipment?
Yes. Depending on the buyer’s preference, the factory can provide video verification, a live video call or a third-party inspection. The selected configuration is checked before packing.
Next step
Ask us to configure the SL1625FG around your material.
Send the material, thickness, drawing, output and destination. We will reply with the tool set, table size and the next verification step.